How to print A1 drawings to scale
Updated 28 October 2026 · 4 min read
A drawing at 1:100 is only useful if it prints at 1:100. Most scale problems come from the PDF being the wrong page size, or from a printer quietly shrinking it to fit. Here's how to get it right.
1. Export the PDF at the size you'll print
Set the page or layout size in your CAD program to A1 (594 × 841 mm) or A2 (420 × 594 mm) before you export, and keep one drawing per page. A drawing set up on A3 and enlarged to A1 is no longer to scale.
- AutoCAD: plot to a PDF using an ISO full bleed A1 or A2 paper size, with the plot scale set (not 'Fit to paper').
- Revit: create a PDF export using a sheet size that matches your title block.
- Other programs: choose 'Actual size' or '100%' scaling when you save as PDF, never 'Fit to page'.
2. Include a scale bar
A scale bar is the quickest way to check the print. Text such as '1:100 @ A1' only stays true if the sheet comes out at A1, while a scale bar shows you straight away if anything has been resized.
3. Check the PDF before you upload
- Open the PDF and check the page size in its document properties: it should say 594 × 841 mm (A1) or 420 × 594 mm (A2).
- Zoom in on fine lines and small text to make sure nothing is missing or rasterised.
- Make sure each sheet is the right way round, landscape or portrait.
4. Measure the printed sheet
When the drawings arrive, put a ruler against the scale bar. If 1 m on the scale bar measures 10 mm at 1:100, the print is to scale. We print A1 and A2 at 100% from your PDF, so a correctly set-up file comes out to scale.